水晶卷簾門一般有中裝、內裝、外裝三種安裝方式，不同的安裝方式有不同的配置需求，也有各自的優勢與劣勢，要根據現場環境和客戶的具體要求選擇合適的安裝方式。下面濟南卷簾門廠家為您講解相關事項。

There are generally three kinds of installation methods for crystal roller shutter doors: medium decoration, interior decoration and exterior decoration. Different installation methods have different configuration requirements, as well as their own advantages and disadvantages. Appropriate installation methods should be selected according to the site environment and the specific requirements of customers. Next, Jinan roller shutter door manufacturer will explain relevant matters for you.

水晶卷簾門的安裝方式：

Installation method of crystal roller shutter door:

1、中裝：將卷簾門窗安裝在建筑物預留的洞口內

1. Medium decoration: install rolling shutter doors and windows in the reserved openings of buildings

2、內裝：將卷簾門窗貼裝在建筑物預留洞口內墻面

2. Interior decoration: install the rolling shutter doors and windows on the inner wall of the reserved opening of the building

3、外裝：將水晶卷簾門窗貼裝在建筑物預留洞口外墻面

3. Exterior decoration: mount the crystal roller shutter doors and windows on the outer wall of the reserved opening of the building

水晶卷簾門的安裝步驟：

Installation steps of crystal roller shutter door:

1、確定安裝卷簾門的位置，并用線墜、水平尺等工具進行標注，找準水平線和垂直線。

1. Determine the installation position of the roller shutter door, mark it with plumb bob, level ruler and other tools, and align the horizontal line and vertical line.

2、根據定位的劃線開始安裝卷簾門的邊框。

2. Start to install the frame of the roller shutter door according to the marked line.

3、根據卷門機的說明書所提示的方法步驟以及注意事項進行卷簾門機的安裝。

3. Install the roller shutter door machine according to the method steps and precautions indicated in the manual of the roller shutter door machine.

4、將組裝好的卷簾門體固定好，然后將限位器找準位置裝上，并試著運轉。進行滑道、手動機構、包箱的安裝。

4. Fix the assembled roller shutter door, and then install the stopper at the correct position and try to run. Install the slide, manual mechanism and bag box.

注意：

be careful:

所有電動控制的卷簾門，啟閉運行方向須與開關箱指示相同，特別是在新接通電源試車或外來輸入電源變換相線時，維修電動卷簾門電機應先使用手動裝置將門簾置于門洞高度1/2的位置，接通電源后試操作卷門啟閉，直到與指示相附，方可正常使用，否則損壞限位器，引起卷簾反卷或沖頂?shù)榷斐蓳p失。

The opening and closing operation direction of all electrically controlled roller shutter doors shall be the same as that indicated by the switch box. In particular, when the power supply is newly connected for trial run or the external input power is used to change the phase line, the motor of the electric roller shutter door shall be maintained by first using the manual device to place the door curtain at the position of 1 / 2 of the door opening height. After the power supply is connected, the roller shutter shall be operated for trial operation until it is attached with the indication. Otherwise, the stopper will be damaged, Causing the roller shutter to reverse roll or rush to the top and causing losses.

卷簾門門簾和易銹部位，應進行定期防腐、油漆及保養處理，禁止用重物、硬物沖擊門面。

The rolling shutter door curtain and rust prone parts shall be regularly treated with anti-corrosion, paint and maintenance. It is prohibited to impact the door surface with heavy objects and hard objects.

卷簾門運行時如有發生較大抖動或異常聲音時應停機檢查，排除有礙門簾正常啟閉的雜物。

In case of large shaking or abnormal sound during the operation of the rolling shutter door, stop the machine for inspection to eliminate the sundries that hinder the normal opening and closing of the shutter.

水晶卷簾門是現在許多大型或者車庫所需要安裝的一種門，既開關方便，又節省空間，因此應用的比較廣泛，在生活中很多地方都能見到，那么您有購買需求就可以來關注我們網站http://m.cxfk.net.cn咨詢了解相關事項了。

Crystal roller shutter door is a kind of door that needs to be installed in many large shopping malls or garages. It is convenient to open and close and saves space. Therefore, it is widely used and can be seen in many places in life. If you have a purchase demand, you can follow our website http://m.cxfk.net.cn Consulted to understand relevant matters.