手動卷簾門具有保溫、保濕、防蚊、防塵、防異味、隔音、防火、防風等功能。那么使用過程中怎樣減少手動卷簾門出現危險現象呢？下面濟南卷簾門廠家為您講解下。

The manual rolling shutter door has the functions of heat preservation, moisture preservation, mosquito prevention, dust prevention, odor prevention, sound insulation, fire prevention, wind prevention, etc. So how to reduce the danger of manual rolling shutter door in use? Next, Jinan roller shutter door manufacturer will explain it to you.

1、手動卷簾門機運行時，門下禁止站立或通行，門簾下方不得有阻礙物。

1. When the manual rolling shutter door machine is running, it is prohibited to stand or pass under the door, and there shall be no obstacles under the door curtain.

2、在啟閉卷簾門時下面不準有人、貨物、車輛站立、通過，以防止行程開關失靈，卷簾卡死，電機受阻和發生其他事故。

2. When opening and closing the roller shutter door, no people, goods or vehicles are allowed to stand or pass under it, so as to prevent failure of travel switch, locking of roller shutter, motor blockage and other accidents.

3、合理的升降速度能減少能源浪費與傳動部件的摩擦損耗，也有助于延長變頻器的的使用壽命

3. Reasonable lifting speed can reduce energy waste and friction loss of transmission parts, and also help to extend the service life of frequency converter

4、禁止高度、寬度大于卷簾門的門框高度、寬度的貨物或車輛通過，防止撞壞門軌、門扇，影響卷簾門的正常使用和使用周期。

4. Goods or vehicles whose height and width are greater than the height and width of the roller shutter door frame are prohibited to pass through, so as to prevent damage to the door rails and leaves, affecting the normal use and service cycle of the roller shutter door.

5、卷簾門在啟閉停止過程中應具備隨位停止之功能，不應有停止而繼續下滑現象，如發生下滑距離大于50mm的情況出現，立即對手動卷簾門控制電器和卷門機制動器進行仔細檢查修理，運行正常為止。

5. The roller shutter door shall have the function of stopping with the position during the opening and closing process, and shall not stop and continue to slide. If the sliding distance is greater than 50 mm, the manual roller shutter door control appliance and the roller shutter mechanism actuator shall be carefully checked and repaired immediately, until they operate normally.

6、在維修與養護快速門電機時，需要請人員負責，維修時應切斷電源，非人員不得打開電器箱，以防觸電。

6. When repairing and curing the motor of the fast door, it is necessary to ask a professional to be responsible for it. The power supply should be cut off during maintenance. Non professional personnel should not open the electrical box to prevent electric shock.

7、定期檢查門體活動部分，保證運行不會受阻，保持潤滑，運行聲音正常，否則有可能造成對人員或物品危險，影響快速門使用壽命。

7. Regularly check the moving parts of the door body to ensure that the operation is not blocked, lubrication is maintained, and the operating sound is normal, otherwise it may cause danger to personnel or goods and affect the service life of the fast door.

8、卷簾門使用完畢后要及時關閉，禁止長時間開啟。

8. The roller shutter door shall be closed in time after use, and it is prohibited to open it for a long time.

使用卷簾門時候遇到停電，應該做的就是按住急停按鈕。再進行卷簾門的維護保養工作，如果遇到長時間的停用狀態，需要將卷簾門升到限制位，并斷開快速門的開關電源，保障卷簾門的使用壽命。更多相關事項就來我們網站http://m.cxfk.net.cn咨詢！

In case of power failure when using the rolling shutter door, what should be done is to press and hold the emergency stop button. Then carry out the maintenance of the roller shutter door. If the roller shutter door is out of service for a long time, it is necessary to raise the roller shutter door to the limit position and disconnect the switch power of the fast door to ensure the service life of the roller shutter door. Come to our website for more information http://m.cxfk.net.cn consulting service